Block VPN Access Tutorials using MikroTik

drop vpn with mikrotik

Block VPN access using Mikrotik. To get to the configuration stage we must first understand how VPN (Virtual Private Network) works. Usually people use VPN access to be able to access the sites that we have filtered.

To avoid internet access used for negative things as network admins sometimes we need to do some filtering access. Here’s how to block VPN access using Mikrotik.

Among the several VPN protocols that exist, the most widely used are PPTP and L2TP/IPSec. Each VPN protocol has its own port, from that port we can already start the configuration on Mikrotik. Here the VPN port data is PPTP and L2TP/IPSec.

Point to Point Tunneling Protocol ( PPTP )

  • TCP/1723 : digunakan oleh pptp control path.
  • GRE : digunakan oleh pptp data path.

Layer Two Tunneling Protocol over Internet Protocol Security (L2TP/IPSec)

  • UDP/500: Used by IKEv1/IKEv2 IPSec control path.
  • UDP/4500: Used by IKEv1/IKEv2 IPSec control path.
  • UDP/1701: Used by L2TP Control.
  • ESP/50 : data path ESP.

Block configuration via new Mikrotik terminal

configuration drop vpn with mikrotik

Here is our tutorial to block access VPN using mikroTik , and if you need to know more basic tutorial how to block Facebook access using mikroTik you can read here. And if it is useful then share and subscribe to our channel. Thank you everyone 🙂

About the author: One _e

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *